Concrete Coating Removal: Two Common Types and more

Imagine the entire floor gone. 

Difficult right? You cannot just think a whole massive space is gone. What you might picture is a ground sinking, crumbs scattered around, and cement floors simply in a mess.

That gives you the picture of why concrete removal Los Angeles is a necessary process handled by the experts. The concrete coating removal is work worth of tough hands from the master artisans. It’s a difficult job.

concrete coating removal

So it is a big NO if you want to DIY remove the damaged floor coating. Now get to know of this vital flooring process.

 

Also, it would help if you had a clear definition of what it is, concrete coating removal.

What are Types of Concrete Removal?

First and foremost, concrete coating removal refers to stripping the existing or old coating on the concrete floors. 

 

You will not remove the entire flooring. When you hear someone say, “he needs concrete removal,” maybe it means removing the top coating. Lest removing the whole slab, it will cost you mounts of time, effort, and money.

 

This particular flooring application has two standard processes for doing it.

  1. Caustic Strippers

 

The first is with the use of strippers. What are these? Read on.

 

For different coating requirements, there is also a particular type of product to remove them. It would be best to use what is also referred to as a “caustic stripper” to remove the old coating.

 

Here are typical products to use:

 

  • Alcohol 
  • Muriatic acid
  • Methylene chloride
  • Esters
  • Alkaline


2. Mechanical removal

 

The second kind of removal involves mechanical methods.

 

The most common is sanding or grinding the surface. This usually involves large machinery or deceive used to roll or drive on the surface to scrape a thin solid layer. Standard terms for this process include diamond grinding, bead blasting, or sandblasting. Call it sanding.

Are you qualified for concrete removal?

Do you go ahead with removing an existing coating anytime you want? Even though the process takes simple steps, it is better to look at the floor’s condition and decide accordingly. What could be the reason for taking off the floor’s protective sealer?

Two common conditions qualify you for concrete removal:

 

  1. Remove coating for damaged flooring surface

Here are what to watch out for on the surface of the concrete you stepping onto:

  • Scaling off the thin concrete surface
  • White blotches that look like stains
  • Fading color or the surface looks washed out or blushed
  • Frosted stains on the surface
concrete coating removal

Do you see these appearing on the floors? You may be qualified for this procedure. If you are not sure, it is better that you ask a local contractor near you to give you assurance and guidance.

2. Remove coating for concrete preparation

Another reason for removal is to change existing coatings. You might realize that you no longer find your flooring design appealing. There might not be enough damage to recoat the floors. However, if the most prominent space in your property does not look desirable, it’s time to make some changes. 

 

Here now, you need to remove the huge eye-sore that covers your home’s interior elegance and as well as its curb appeal.

 

What steps are involved?

One may think of sanding or grinding the surface. As simple as it sounds, DIY removing the existing coating may cause more harm than help. You should seek the help of experts for this job.

 

Take a look at what else you need to do when removing the floor’s coating. 

 

Here are the essential steps or stages:

  • Scrubbing the floor to remove crumbs or flakes of the old coating
  • Cleaning and clearing the floor from all solid residues of the layer and dirt
  • Use the removal method of your choice
Contact Us Today!
Other Locations:
Get Directions
Scroll to Top